Posts Tagged ‘LED home lighting’

LED bulbs

LED is short for light emitting diode. They are like the standard bulbs you can buy around. The distinction is that the LED light gets rid of the use of filaments. These filaments can burn when the bulb is used often. And because this type of lighting technique does not use that, it offers longer lighting proficiency.


How does it function? It simply works by the electron function. Electrons are pushed by using a semiconductor that is specific to LEDs. When this is lighted, it creates brighter lights in comparison to other types of lighting products. It is directly hooked up to a circuit.


It is usually made up of whisker that is then attached to anode. Another part you will discover here is the Anvil which is directly connected to the cathode. What is remarkable about this is the versatility of the light. It comes in various colors such as bright white, yellow, red and green. The white colored ones are not really pure white in color but are bluish white. It is because, it is challenging to create clean white lighting color.


Features of Using LED lights


1. One of its appeals is its labeled efficiency. You can use this kind of light even with minor source of electric energy. It still shines significantly brighter even with less source of current. Therefore, it does not wear out instantly.


2. It does not work with filaments. The original lights use filaments that might burn when used over time. That is why you need to upgrade incandescent bulbs quite often as the filaments tend to burn. Also, this does not exude heat very quickly which can then minimize your electricity consumption. Scientific studies say that most electricity consumed by light bulbs is not because of the lighting but because of the heat generated.


3. Covers a wider area. When you are in setting where you will need more brilliant lights to cover more space, this is good choice. You can use it to attract recognition when stranded in distant place.


4. Another edge is the construction. It is not made of any loosely fitting parts or excess parts that may jiggle around and come loose. It stays unaffected even when you drop it, that is why it is an all-around type of flashlight. It is also produced from a material called epoxy resin rendering it very much durable. However, because of these features, this type of flashlight is more expensive.

Read MoreFebruary 3, 2012 10:46 pm - Posted by admin

LED bulbs

LED lights appeared to be coined as the best kind of lighting system. However, acquiring this from the retailer can cost an arm and a leg because these bulbs are generally more high end than the conventional lamps. But with a few modifications, you can rearrange your worn out lamp to a LED one. You just need to get a LED bulb, do the following actions and you are done:


Step 1: First, you must plan the circuit that you are going to carry out. If you have no idea how it should operate, search for some diagrams using the web and closely follow it. You will find a lot of planned diagrams when you Google for it. Search for the materials you are going to need. Most of what you need can be found in a flashlight so if you have an old flashlight at home, you might like to use the parts including the switch and battery holder. Also purchase the other essentials such as the batteries, the LED bulb and the electrical wires.


Step 2: Now organize the circuit to the strategy you have downloaded. Use the cables to connect the bulbs. If you use a parallel circuit, this could be easier to use. Try the connection primarily by attaching the batteries. If it lights up, it is now running well. After you have already ensured that it is operating, solder the circuits and then let it cool down before mounting it on the light fixture case. You should also leave the battery holder for you to have easier access so you can adjust it should you want.


Step 3: Now check the makeshift lamp you designed. Try for an hour and find out if it does work well. If you wish to obtain a brightness controller placed in your lamp, you could just place a potentiometer in the circuit. Plan the circuit design first before doing this.


Now you could have a LED lamp you can use any moment. This is a great battery saver as it only consumes less energy. This implies you won’t have to change the battery as often as you did with other forms of lamps. Also, LEDs do not have filaments so they do not burn off and thus prolonging the life of the lamp. Instead of shopping one, why not try the steps mentioned previously and make your very own light? You could have a more efficient lights in your area without paying much.

Read More 10:46 pm - Posted by admin

Right now, 131 years as soon as Thomas Edison was granted a patent for the incandescent bulb, the motivation for even more economical lamps grows by using the LED replacement bulbs to obtain the Edison-like good quality.

Additional LED lighting (light emitting diodes) are coming straight to the United States market as the Congress-mandated phaseout of Edison’s horse-and perhaps-buggy era creation will start next season. Cree, Incorporated said that it has taken place with the brightest, most efficient, LED lighting bulbs to change the usual incandescent lighting fixtures for household.

“This is the first no give up option for a 60-watt incandescent bulb, ” Chuck Swoboda, the company’s chairman as well as chief executive officer, said in the announcement. “In the challenge to commercialize low-cost, energy-efficient LED light bulbs, the industry has not remembered that LED lighting product is designed to be as excellent as the technologies it is switching and changing. “

The light bulb, not yet on the market in stores, is gloomy and perhaps consumes not even 10 watts. Swoboda said it will be the very first LED to complete the United States government’s Energy Star prerequisites for 60 watt substitution lamps when it comes to efficiency as well as light high quality.

The Lighting Science Group Corporation has created a latest group of LEDs, called the Definity series. Home Depot has begun marketing its nine-watt LED on the internet and also in stores.

Some other companies have likewise presented LED replacements for incandescents. Lighting Science Group explained last month that it was the first United States company to produce one million LED light bulbs in less than a year. It revealed a LED A19 replacement for the 60-watt incandescent which is dimmable, mercury-free and 80% more effective. It says it will be in the store below $30, starting this month, at The Home Depot.

Moreover to enhance the 60-watt incandescent, America’s best-selling light illumination, Royal Philips Electronics released last year a 12-watt Endura LED as well as Osram Sylvania launched its Ultra 12-watt A-line LED bulb to be sold this year at Lowe’s. General Electric offers LED replacements, too.

Americans are becoming a lot more aware about the forthcoming United States condition for energy efficient lighting, still many remain in the dark about its points, determined by a phone market analysis revealed last month by Osram Sylvania.

A little bit more than a 3rd, or 36%, said they accepted the Congress passed legislation in 2007 to phase out a lot of traditional, incandescent light bulbs by 2014, up from 26% in 2009 and 21% in 2008. Yet only 19% believed that the 100-watt incandescent will be the very first light bulb to be stopped from United States stores, beginning in Jan. 1, 2012. California began implementing the phaseout this month, a year forward of the United States plan.

Finally, the LED lamps will be the future for household and even commercial lighting to help save not only money but as well as the globe.

John Reid is, an electrician and advocate in living Green, been helping to promote high quality LED light bulbs products to consumers in saving energy and money just by changing incandescent bulbs to LED light bulbs. Get the full story and reap the rewards TODAY at

Read MoreJanuary 25, 2012 8:27 pm - Posted by admin