Posts Tagged ‘LED lighting’

LED bulbs

LED is short for light emitting diode. They are like the standard bulbs you can buy around. The distinction is that the LED light gets rid of the use of filaments. These filaments can burn when the bulb is used often. And because this type of lighting technique does not use that, it offers longer lighting proficiency.


How does it function? It simply works by the electron function. Electrons are pushed by using a semiconductor that is specific to LEDs. When this is lighted, it creates brighter lights in comparison to other types of lighting products. It is directly hooked up to a circuit.


It is usually made up of whisker that is then attached to anode. Another part you will discover here is the Anvil which is directly connected to the cathode. What is remarkable about this is the versatility of the light. It comes in various colors such as bright white, yellow, red and green. The white colored ones are not really pure white in color but are bluish white. It is because, it is challenging to create clean white lighting color.


Features of Using LED lights


1. One of its appeals is its labeled efficiency. You can use this kind of light even with minor source of electric energy. It still shines significantly brighter even with less source of current. Therefore, it does not wear out instantly.


2. It does not work with filaments. The original lights use filaments that might burn when used over time. That is why you need to upgrade incandescent bulbs quite often as the filaments tend to burn. Also, this does not exude heat very quickly which can then minimize your electricity consumption. Scientific studies say that most electricity consumed by light bulbs is not because of the lighting but because of the heat generated.


3. Covers a wider area. When you are in setting where you will need more brilliant lights to cover more space, this is good choice. You can use it to attract recognition when stranded in distant place.


4. Another edge is the construction. It is not made of any loosely fitting parts or excess parts that may jiggle around and come loose. It stays unaffected even when you drop it, that is why it is an all-around type of flashlight. It is also produced from a material called epoxy resin rendering it very much durable. However, because of these features, this type of flashlight is more expensive.

Read MoreFebruary 3, 2012 10:46 pm - Posted by admin

LED bulbs

LED lights appeared to be coined as the best kind of lighting system. However, acquiring this from the retailer can cost an arm and a leg because these bulbs are generally more high end than the conventional lamps. But with a few modifications, you can rearrange your worn out lamp to a LED one. You just need to get a LED bulb, do the following actions and you are done:


Step 1: First, you must plan the circuit that you are going to carry out. If you have no idea how it should operate, search for some diagrams using the web and closely follow it. You will find a lot of planned diagrams when you Google for it. Search for the materials you are going to need. Most of what you need can be found in a flashlight so if you have an old flashlight at home, you might like to use the parts including the switch and battery holder. Also purchase the other essentials such as the batteries, the LED bulb and the electrical wires.


Step 2: Now organize the circuit to the strategy you have downloaded. Use the cables to connect the bulbs. If you use a parallel circuit, this could be easier to use. Try the connection primarily by attaching the batteries. If it lights up, it is now running well. After you have already ensured that it is operating, solder the circuits and then let it cool down before mounting it on the light fixture case. You should also leave the battery holder for you to have easier access so you can adjust it should you want.


Step 3: Now check the makeshift lamp you designed. Try for an hour and find out if it does work well. If you wish to obtain a brightness controller placed in your lamp, you could just place a potentiometer in the circuit. Plan the circuit design first before doing this.


Now you could have a LED lamp you can use any moment. This is a great battery saver as it only consumes less energy. This implies you won’t have to change the battery as often as you did with other forms of lamps. Also, LEDs do not have filaments so they do not burn off and thus prolonging the life of the lamp. Instead of shopping one, why not try the steps mentioned previously and make your very own light? You could have a more efficient lights in your area without paying much.

Read More 10:46 pm - Posted by admin

home lighting

Outdoor garden LED lighting are accessible in| a wide variety of varied colors|, styles and designs. A distinctive illumination| like the outdoor post lights and also the outdoor street| lights, are only handful| of the many| types of outdoor garden LED lighting readily available|. The use| of outdoor| spot lights and outdoor flood LED lighting could go a long way to help you| enrich| particular parts| of the outdoor garden..

The outdoor garden LED lighting may also| be using outdoor decorative LED lighting|. The use of animals or different ideas| will also be enjoyed. The patio lights may| assist to bring| charm and warmth into the outdoor decks in| the garden areas as well. The outdoor step lights can assist| to keep the guests safe| from tripping on the steps.

One of the most effective| uses of the outdoor lights is to improve| the fashion| in outside setup. To take the dark| area and convert| it into an out-of-door amusement| center, is a remarkable means to build up| family and friends ties and to feel safe| and secure. The use of outside| landscape lights would spotlight| various areas to be cherished| or even to be avoided.

The function| of underwater fountain lights or pool| lights is to enhance| the fountains, waterfalls or fish ponds around the garden| area. The use of assorted| colors will add entertaining| depth into the water concept|. Specialty LED lighting would bring| other fascinating layers in your| garden. Pavement LED lighting and| driveway LED lighting can be used to supply| the warm greeting for your arriving| guests because these lights may be placed| in the sidewalk| or the concrete. There may be big rocks| and some other items| to be located in a garden point| that features LED lighting also.

The ground level LED lighting will be a special| way to light up| objects but not present the body| bulb attachment|. The outdoor garden lighting| would be significant help| to also| illuminate trees, buildings, signs or something| you might need to draw consideration| to. The outdoor rope LED lighting can also be fantastic| for letting people to creatively manipulate| the LED lighting. Available in enormous| range of colors, manageability|, usage of| chasing and flashing LED lighting can be| entertaining also. Strands of flexible clip LED lighting is a good means| to cover| awnings, trees, gazebos, house windows|, boats, small complexes|, or maybe outside sting lights| to create the perfect down| LED lighting for party lights or perhaps eatery| decorating lights.

External| garden light is more than simply the usual way| for your landscape to look good|, it can be another way to induce| the guests and friends to be assured| at your house. And also, do not forget| to consider| the outdoor solar LED lighting that is available in many local stores| today. The ease| of installation and less energy consumption| is a major plus.

Outdoor garden lights may be| available in an amazing selection| of different designs, styles and colors. One of the roles| of different lights such as|, the outdoor post LED lighting and also| the outdoor path lights are the protection| of the different layouts| of outdoor garden.

Read MoreNovember 20, 2011 9:19 am - Posted by admin